Jensen VM8013 operation manual Radio Operation

VM8013

RADIO OPERATION

1

DISP CH/

CAT

DIM

SRC PTY

BAND

iPod Menu

INT

1 2

RPT RDM

3 4

DN UP

5 6

18

A/V IN

Select a Band

Press the BAND button (3) to change between three FM and two AM bands. Each band stores up to six preset stations.

Tuning

Seek Tuning

Press the TUNE/TRACK >> or << buttons (17) to seek the next/previous station automatically.

Manual Tuning

Press and hold the TUNE/TRACK >> or << buttons (17) to enter Manual tuning mode. Press the buttons again to move the radio frequency number up or down one step.

Accessing Radio Mode

Press the SRC button (6) on the front panel or remote control (14) to switch to the RADIO source.

1	7	3	2	8	4
	Radio FM1 P1 87.5 MHz				01:02
					AM
	ST			PTY
	P1		87.5 MHz
	P2		90.1 MHz
	PS: SO SMALL
	5				6

1.Stereo Reception Indicator

2.Radio Station Frequency

3.AM/FM Band

4.Time/Clock

5.RDS Information

6.Current Preset Channels

7.Source Indicator

8.PTY Indicator

Program Information

To view available program information, press the PTY button (14) on the control panel. Press repeatedly to choose between Program Type (PTY) category, Program Service station call letters (PS), and Radio Text (RT).

PTY Search

To view the Program Type categories, press and hold the PTY button (14) on the control panel. Program type categories are listed, allowing listeners to find similar programming by genre. Press the TUNE/TRACK >> or << buttons (17) to select a category. After a few seconds, the radio will start scanning for stations broadcasting in the selected category.

Preset Stations

Up to six stations on each band can be stored as presets, which can then be instantly recalled by pressing the associated preset button (8-13). To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for presets on the other four bands.

Preview Scan

Press the button (16) to scan and play all strong stations for 5 seconds each. Press again to stop scanning and play the current station.

12