VM9114
OPERATING INSTRUCTIONS
Power On / Off
Press the 
/SRC button (10) on the unit to turn the unit on. You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen.
Press and hold the 
button to power off the unit.The monitor is drawn back into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder MUTE button (11) on the front panel to mute the volume from the unit. Press the rotary encoder button again to restore the volume. Adjusting the volume or using any of the audio setup features cancels the mute function.
Playing Source Selection
When the monitor is closed, press the SRC button (4) to change between available audio playing sources in the following order: RADIO, DISC, USB1, and AUX.
Source Menu
You can also use the touch screen to change the source through the SOURCE MENU. To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button on the front panel (10).
RADIO | SOURCE MENU |
|
RADIO DISC USB1 AUX
Touch the RADIO, DISC, USB1 or AUX button to select the corresponding source.
8
