Jensen VM9114 Parking Brake Inhibit, Monitor Movement Mechanism, Monitor Protective Measures

VM9114

3.Press the PIC button on the monitor (2) 1-3 times to exit the picture adjustment menu.

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle Parking Brake circuit, the front TFT monitor will display video when the Parking Brake is engaged. (When the pink wire is grounded via the Parking Brake circuit, video will be displayed.)

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor:

Table 2: Monitor Protective Measures

Obstruction	Self Protection	OPEN Button	Power
		Pressed	Reconnected
Monitor loading	Monitor is automati-	Monitor fully	Monitor is automati-
out horizontally	cally loaded into unit	extended horizon-	cally loaded into unit
		tally
Monitor loading in	Unit stops at	Monitor fully	Monitor is automati-
horizontally	obstruction point	extended horizon-	cally loaded into unit
		tally
Monitor loading	Unit stops at	Monitor swivels	Monitor swivels
out vertically	obstruction point	back to the unit	back to the unit
Monitor loading in	Unit stops at	Monitor swivels	Monitor swivels
vertically	obstruction point	back to the unit	back to the unit

After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the power.

7