OPERATING INSTRUCTIONS
Power On / Off
Press the
/SRC button (6) on the unit (or the
button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen.
Press and hold the
button to power off the unit.The monitor is drawn back into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.
Mute
Press the MUTE button (8) on the front panel or the MUTE button (3) on the remote to mute the volume from the unit. Press the MUTE button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function.
Playing Source Selection
Press the SRC button (6) on the front panel or the SRC button (8) on the remote to change between available playing sources in the following order: AM/FM, DISC, AUX IN1, AUX IN2, SAT, and CAMERA. The playing mode is displayed on the TFT and LCD screens.
External peripheral devices can be connected to this unit via RCA output or MediaLink. Select
Volume Adjustment
To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOL- buttons (15, 16) on remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds.
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
Press the AUDIO button (5) on the front panel once to display the audio menu. To adjust an audio feature:
1.Turn the rotary encoder (5) on the front panel, press the (>>)/(<<) buttons (14, 22) on the remote control, or use the joystick to highlight the audio feature to be adjusted.
2.Press the joystick button (13) to select the highlighted option.
3.Rotate the AUDIO button (5), press the <<, >>, >>, or << buttons (17, 19, 14, 22) on the remote control, or use the joystick to adjust the selected feature to the desired setting.
Table 4: Audio Adjustments
Audio Function | Adjustable Range |
|
|
|
|
EQ | User |
| Acoustic |
| Urban |
| Rave |
| Latin |
| Dance |
| Hip Hop |
| Rock |
BASS | |
MID | |
TREBLE | |
SUB | |
FAD | Grid |
BAL | Grid |
NOTE: The EQ mode will automatically change to “USER” when individual audio functions are adjusted.
The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press and hold the AUDIO button (5).
System Reset
To correct a system halt or other illegal operation, use the tip of a pen
to press the reset button (12) located
on the front
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.
Line Mute
If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone or when verbal navigation is performed.
12
