Jensen Tools DV1628 owner manual Reset, Remote IR, Display, Eject

toggle between EQ settings, each press will toggle from Flat, Classic, Pop, Rock, to off.

14.Angle:Allows the viewer to view the DVD at different angles if the DVD is recorded with this feature. Press the angle button while the DVD is Stopped. Then

press the / to adjust the brightness and contrast levels.

15.Disp/Clock: Press to display the Clock or Disc

information. Setting the clock: Press and hold the Disp/Clock button until the display begins to flash. Press the #6 / to adjust the hours or minutes.

16.Subtitle: Changes the subtitles language on the DVD if the DVD is recorded with this feature.

17.Title:Displays the title that is stored on the CD/DVD.

18.Setup:Displays the setup menu.

19. 0-9: Numeric key buttons.

20.M1-M6:Selects the Radio stations stored in the memory.

21. Scan:Scans the entire disc and plays the first 10 seconds of each track.

22.Repeat:Replays the current disc or track.

23.Random: Plays the disc in random.

24.Disc- / Disc+: Chooses the CD/DVD, ( only if CDC or DVDC is connected.

25.	Reset:	Reset button, press only if the unit is
	locked up. This resets the unit to the factory settings.
26.	Remote IR:	Receiving sensor for the remote control.
27.	Display:	Main unit display
28.	Eject:	Eject the CD or DVD

29.Smart Mode / Disc: Press the Smart mode button to put the unit into Smart mode. See Smart mode function. In DVD changer mode ( Only if DVDC is connected ) press the button to enter the Disc Menu.

CLK

1

SCN RPT

RND D.DN D.UP

29

9

AS/PS

11

5

6

13

DSP

16

17

1814

4

5

15

19

10

8

7

2

12

5