CDX6311
8
character, press in on the volume control to move to the next space and select the next
character. To leave a blank space, press the volume control again.
Greeting Note
When the unit is powered on, one of three greetings is displayed based on the time of day:
“Good Morning”, “Good Afternoon” or “Good Evening”. When the unit is powered off with the
ignition on, the LCD scrolls through the following messages (if the selectable clock display
feature is activated): “Radio Off”, “Visit us at Jensen.com”, “Enjoy Driving and Have a Safe
Trip”.
Front Panel Release
The front panel release button (9) releases the mechanism that holds the front panel to the
chassis.
Detaching the Front Panel
To detach the front panel, first press the front panel release button to release the left side of the
panel. Next, grasp the released side and pull it off the chassis. After removing the front panel,
store it in the supplied carrying case to protect it from dirt and damage.
Re-attaching the Front Panel
To re-attach the front panel, make sure the electrical terminals on the back of the panel are free
of dust and dirt, as debris could cause intermittent operation or other malfunctions. Position the
right side of the panel in place so that it is correctly engaged, then lightly press the left side of
the panel until the mechanism locks it into place.
Reset Button
The reset button is located on the front of the chassis and can only be accessed with the front
panel removed. The reset circuitry protects the microprocessor circuitry. Since resetting the
unit will erase the time and preset memories, it should only be activated upon initial installation
after all wiring is complete or if there is a malfunction of any of the switches on the unit. In these
circumstances, pressing the reset button will clear the system and return the unit to normal
operation.
Theft Deterrent LED
A light-emitting diode (LED) is located on the chassis behind the front panel and will flash when
the panel is removed. The flashing light serves as a visual warning to the would-be thief that
the unit has been disabled by removal of the front panel.
REMOVE FRONT PANEL