WARNING
the entire contents of this manual before attempting assembly or
operation of the dust collector!
Failure to comply may cause serious injury!
1.Finish removing all contents from the shipping carton.
2.Report any damage to your distributor.
3.Do not discard any shipping material until
after the dust collector has been assembled and is running properly.UnpackingRead and understand
Contents of the Shipping Carton
1Bag Hanger
1Base
1Plastic Cover
1Hanger Bracket
1Hose
1Owner's Manual
1Warranty Card
1Motor/Fan Assembly
1Collector Bag
1Filter Bag
2Hose Clamps
1Retainer Strap
4Casters
1Inlet Cover & Hose Inlet
3Support Legs
1Bag of Assembly Hardware
Tools Required for Assembly
2.1/2” or 13mm Wrenches or sockets
1.9/16” or 14mm Wrench or socket
1.#2 Cross Point Screw Driver
5
