9
Figure 4
Column Lock Handl e Referring to Figure 5:
Thread the column lock handle (D) into the table
bracket (E).
Figure 5
Table Installation Referring to Figure 6:
1. Place the table (A) on the bracket (B).
2. Tighten the table lock handle (C).
Figure 6
Referring to Figure 7:
1. With the aid of a second person, carefully lift
the head onto the column top a nd slide it
down into position
The head assembly is heavy! Use care w hen
lifting onto the column!
2. Rotate head assembly until sides of t he
pulley cover are parallel with the sides of the
base.
3. Tighten two setscrews (A) w ith a 5mm hex
wrench (provided) until they are snug.
Figure 7
4. Install three do wnfeed handles (B) into the
downfeed hub (C).
Chuck and Arbor Installation Referring to Figure 8:
1. Twist the chuck (B) to retract the chuck jaws
if they are exposed.
2. Install the chuck (B) to the arbor (A) tightly.
3. Insert the chuck and arbor assembly into the
spindle (C). Pull the downfeed handle dow n
to press the arbor in place.
Note: Put a piece of scrap wood (D) on the table
to protect the chuck nose when pulling the
downfeed handle (E) down to press into place.