Manuals / Jet Tools / Power Tools / Drill

Jet Tools JDP-17MF Removing the Chuck and Arbor, Unplug machine from the power source

Models: JDP-17MF

1 24
Download 24 pages 44.92 Kb
Page 11
Image 11

9.With the aid of a second person, carefully lift the head onto the column top. Caution:

The head assembly is heavy! Use care when lifting onto the column!

10.Rotate head assembly until sides of the belt cover are parallel with the sides of the base.

11.Tighten two set screws (A, Fig. 4) with a 5mm wrench until they are snug.

12.Install three down feed handles (B, Fig. 4) into the down feed hub (C, Fig. 4).

13.Raise table to approximately seven inches below spindle assembly, and lock the table in place.

14.Place a piece of scrap wood on the table.

15.Thoroughly clean spindle, arbor, and chuck. Important: These three pieces must be free of any rust protection, or lubricant. If they are not clean, the arbor and chuck will fail to seat in the spindle.

16.Place arbor into the chuck.

17.Twist the chuck to retract the chuck jaws if they are exposed.

18.Place arbor and chuck assembly into the spindle.

19.Turn the arbor and chuck assembly until the tang on the arbor engages the slot at the end of the spindle.

20.Lower the down feed handle so that the chuck meets the scrap wood. Pressure on the down feed handle once the chuck meets the scrap wood seats the arbor and chuck into the spindle, See Figure. 5.

Removing the Chuck and Arbor

1.Unplug machine from the power source.

2.Raise the table until it is about seven inchs

below the chuck.

3.Place a piece of scrap wood on the table, and lower quill using the down feed handle.

4.Rotate spindle to align the key hole in the spindle with the key hole in the quill.

5.Insert the drift key (D, Fig. 6) into the aligned slots and tap lightly. The chuck and arbor assembly should fall from the spindle.

11

Page 10 Page 12
Page 11
Image 11
Jet Tools JDP-17MF operating instructions Removing the Chuck and Arbor, Unplug machine from the power source
Page 10 Page 12

JDP-17MF specifications

The Jet Tools JDP-17MF is a highly versatile and robust floor-standing drill press, designed to meet the demands of both professional woodworkers and hobbyists alike. With its powerful motor and advanced features, this drill press offers precision, efficiency, and reliability, making it a valuable addition to any workshop.

One of the standout characteristics of the JDP-17MF is its 3/4 HP, 115V motor, which provides ample power for a variety of drilling applications. This motor delivers a consistent performance, allowing users to tackle tough materials with ease. The variable speed range, which spans from 200 to 3,630 RPM, empowers users to select the perfect speed for their specific tasks, whether they are drilling through metal, wood, or plastic.

The JDP-17MF is equipped with a 17-inch swing capacity, enabling users to drill holes up to 14 inches from the center of the spindle. This feature significantly enhances the versatility of the drill press, allowing for the handling of larger workpieces comfortably. Additionally, the adjustable table, which can be tilted to accommodate angled drilling, further increases the machine's adaptability.

A key technology integrated into the JDP-17MF is the Laser X2 two-beam laser system. This innovative feature provides users with a precise visual guide for accurate alignment of drill bits and workpieces, which enhances drill accuracy. The built-in work light also ensures that your workspace is well-lit, minimizing potential errors in alignment and setup.

Safety is a primary focus in the design of the JDP-17MF. The drill press features a large, easy-to-access ON/OFF switch, as well as a safety key that prevents unauthorized use. The heavy-duty base is designed to add stability and reduce vibrations during operation, providing a safe and secure drilling experience.

Furthermore, the JDP-17MF includes a powerful rack-and-pinion height adjustment mechanism, which allows users to quickly and easily change the height of the table. This feature is particularly beneficial when working on varied projects requiring different drill depths.

In summary, the Jet Tools JDP-17MF is a high-quality drill press that combines power, precision, and safety. With its robust motor, variable speed settings, laser guide system, and ergonomic design, it meets the needs of both novice and experienced users. For anyone looking to enhance their woodworking or metalworking projects, the JDP-17MF is a worthy investment in efficiency and performance.