Grounding Instructions

Caution: This tool must be grounded while in use to protect the operator from electric shock.

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor, with insulation having an outer surface that is green with or without yellow stripes, is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. Use only three wire extension cords that have three-prong grounding plugs and three-pole receptacles that accept the tool’s plug.

Repair or replace a damaged or worn cord immediately.

115 Volt Operation

As received from the factory, your drill press is ready to run at 115 volt operation. This drill press, when wired for 115 volt, is intended for use on a circuit that has an outlet and a plug that looks like the one illustrated in (A). A temporary adapter, which looks like the adapter as illustrated in (B), may be used to connect this plug to a two-pole receptacle, as shown in (B) if a properly grounded outlet is not available. The temporary adapter should only be used until a properly grounded outlet can be installed by a qualified electrician. This adapter is not applicable in Canada. The green colored rigid ear, lug, or tab, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box, as shown in (B).

5

Page 5
Image 5
Jet Tools JDP-17MF operating instructions Grounding Instructions, Volt Operation

JDP-17MF specifications

The Jet Tools JDP-17MF is a highly versatile and robust floor-standing drill press, designed to meet the demands of both professional woodworkers and hobbyists alike. With its powerful motor and advanced features, this drill press offers precision, efficiency, and reliability, making it a valuable addition to any workshop.

One of the standout characteristics of the JDP-17MF is its 3/4 HP, 115V motor, which provides ample power for a variety of drilling applications. This motor delivers a consistent performance, allowing users to tackle tough materials with ease. The variable speed range, which spans from 200 to 3,630 RPM, empowers users to select the perfect speed for their specific tasks, whether they are drilling through metal, wood, or plastic.

The JDP-17MF is equipped with a 17-inch swing capacity, enabling users to drill holes up to 14 inches from the center of the spindle. This feature significantly enhances the versatility of the drill press, allowing for the handling of larger workpieces comfortably. Additionally, the adjustable table, which can be tilted to accommodate angled drilling, further increases the machine's adaptability.

A key technology integrated into the JDP-17MF is the Laser X2 two-beam laser system. This innovative feature provides users with a precise visual guide for accurate alignment of drill bits and workpieces, which enhances drill accuracy. The built-in work light also ensures that your workspace is well-lit, minimizing potential errors in alignment and setup.

Safety is a primary focus in the design of the JDP-17MF. The drill press features a large, easy-to-access ON/OFF switch, as well as a safety key that prevents unauthorized use. The heavy-duty base is designed to add stability and reduce vibrations during operation, providing a safe and secure drilling experience.

Furthermore, the JDP-17MF includes a powerful rack-and-pinion height adjustment mechanism, which allows users to quickly and easily change the height of the table. This feature is particularly beneficial when working on varied projects requiring different drill depths.

In summary, the Jet Tools JDP-17MF is a high-quality drill press that combines power, precision, and safety. With its robust motor, variable speed settings, laser guide system, and ergonomic design, it meets the needs of both novice and experienced users. For anyone looking to enhance their woodworking or metalworking projects, the JDP-17MF is a worthy investment in efficiency and performance.