Contents of the Shipping Carton
1. Sander
1. Sanding Disc
1. Table
1. Miter Gauge
1. Miter Gauge Fence
1. Owner's Manual
1.Warranty Card Hardware Kit
4. Hex Head Bolt M10x35
4. Flat Washer M10
4. Lock Washers M10
2. Hex Nut M6
4. Pan Head Flange Screw M6x12
1. Center Point
1. Right Angle Hex Wrench 3mm
1. Filler Bar
1. Socket Head Cap Screw M5x8
Closed Stand
1. Stand
1.Inlet
2.Hangers
1. Ring Clamp
1. Collector Bag
Tools Required for Assembly & Adjustments
1. 13mm Wrench or socket
1. Combination Square
WARNING
Read and understand the entire contents of this manual before attempting assembly or operation of the disc sander!
Failure to comply may cause serious injury!
Unpacking
1.Remove all contents from the shipping carton(s).
2.Report any damage to your distributor.
3.Do not discard any shipping material until the sander has been assembled and is running properly.
8
