JL Audio J2360.2 When bridged, the amplifier, Do not do this, Servicing your Amplifier

Models: J2360.2

1 11
Download 11 pages 20.04 Kb
Page 6
Image 6

! IMPORTANT

When bridged, the amplifier

will deliver 360W x 1 into a 4 ohm load or 220W x 1 into an 8 ohm load. Operating a pair of bridged channels into a load lower than 4 ohms is not recommended.

Because a bridged pair of channels requires that both channels receive input, you need to connect both left and right inputs to the source unit. Connection of only one input will result in reduced power output, increased distortion and can cause the amplifier to overheat.

Do not do this!

When the J2-360.2 is operating in bridged mode, the output will be in mono (only one channel). This mono channel can contain right channel only information, left channel only information or the sum of the information from both the right and left channels. In order to achieve one of these options, configure the inputs to that pair of channels in one of these two ways:

1)Left Channel Only or Right Channel Only Information: If you wish to send a left-only or right-only signal to the J2-360.2, use a

“Y-Adaptor” to split the single channel signal into both left and right RCA inputs. This option is useful when using the J2-360.2 to drive left channel speakers only and another

J2-360.2 to drive right channel speakers only.

2)Left + Right Channel Information: When bridged and fed by a stereo input, the J2-360.2 will automatically combine the left and right input channels into a summed mono

(left + right) channel. This option is useful when using a the J2-360.2 to drive a subwoofer system or a summed mono center channel.

AMPLIFIER Status Indicator Lights & Protection Circuitry

There are two status indicator lights on the control panel of the amplifier.

Power

Protect

￿ +9dB ass Boost

1)Power(Green): lights to indicate that the amplifier is turned on and operating normally. Located at the far left of the control panel.

2)Protect(Red): Indicates that the amplifier protection circuitry has been activated

to prevent product failure due to thermal overload, short-circuit or a dangerously low impedance connected to the amplifier outputs. Connecting the speaker outputs to an impedance lower than 2 ohms stereo (4 ohms bridged) will cause this protection mode to activate. When this protection mode is activated, the amplifier will shut down to protect its circuitry. When the problem is corrected, the amplifier will return to normal operation and the “Protect” LED will shut off.

Servicing your Amplifier

If your amplifier fails or malfunctions, please return it to your authorized JL Audio dealer so that it may be sent in to JL Audio for service. There are no user serviceable parts or fuses inside the amplifier. The unique nature of the circuitry in the JL Audio amplifiers requires specifically trained service personnel. Do not attempt

to service the amplifier yourself or through unauthorized repair facilities. This will not only void the warranty, but may result in the creation of more problems within the amplifier.

If you have any questions about the installation or setup of the amplifier not covered in this manual, please contact your dealer or technical support.

JL Audio Technical Support:

(954) 443-1100

9:00 AM – 5:30 PM (Eastern Time Zone)

Monday - Friday

10

JL Audio

11

Page 6
Image 6
JL Audio J2360.2 When bridged, the amplifier, Do not do this, Amplifier Status Indicator Lights & Protection Circuitry

J2360.2 specifications

The JL Audio J2360.2 is a state-of-the-art automotive amplifier designed to deliver powerful and precise audio performance. As part of the well-regarded JX series, this amp caters to audio enthusiasts who seek high-quality sound in their vehicles without compromising on space or budget. With a compact design and robust features, it provides an excellent blend of power and efficiency in an array of installation scenarios.

One of the primary features of the J2360.2 is its high power output, rated at 360 watts RMS, which allows it to drive a variety of speaker systems with ease. Users can expect crisp, clear sound that truly enhances their musical experience. The amplifier operates on a Class A/B topology, which is known for its ability to deliver smooth and warm sound quality while maintaining high-efficiency performance. This combination results in minimal distortion at higher volume levels, making it an ideal choice for those who appreciate clarity in their audio playback.

The J2360.2 features a user-friendly interface that includes variable crossover controls. This allows users to tailor the audio output to their specific needs, whether they are driving full-range speakers or subwoofers. The low-pass crossover is adjustable from 50 Hz to 200 Hz, enabling precise tuning to enhance the performance of the system. Additionally, high-pass filtering is available, which helps protect smaller speakers from low-frequency damage.

Built with durability in mind, the J2360.2 has a high-grade aluminum. This ensures efficient heat dissipation, maintaining performance even during extended listening sessions. The amplifier is also equipped with protection circuitry that safeguards against short circuits and over-temperature to increase longevity and reliability.

Installation is simplified through the amplifier's compact form factor and rear-mounted connections. Designed for ease of use, consumers will find it integrates seamlessly into vehicle systems of varying sizes. The J2360.2 maintains a sleek aesthetic, ensuring that it looks as good as it sounds.

In summary, the JL Audio J2360.2 amplifier represents an amalgamation of power, performance, and practicality, making it an outstanding choice for car audio enthusiasts who prioritize sound quality without sacrificing space or budget. Its combination of advanced features, durable construction, and user-friendly design make it a standout option in the competitive market of automotive amplifiers. Whether upgrading an existing system or starting from scratch, the J2360.2 is poised to elevate the in-car listening experience to new heights.