S T E P 3

Looking from the front of the vehicle towards location #1 from the previous steps, notice mounting and, orientation of Hex Head Bolt, Split Lock Washer, Hex Nut. Use the Long gold colored bolt, Split Lock Washer and Hex Nut at location #2 in the previous step.

Once all of this hardware is installed, It’s also safe to now tighten this all of this hardware.

S T E P 4

Set the enclosure on the ground in front of the drivers side rear wheel oriented as shown.

S T E P 5

Lift the enclosure up onto the previously installed bracket.

S T E P 6

From underneath the enclosure, start the hardware through the holes in the bracket installed in STEP 2.

DO NOT TIGHTEN AT THIS TIME.

SB-POL-RNGR700 INSTR_SKU# 011295

S T E P 7

Install the “Zig- Zag” bracket as shown, line it up with the upper seat rail and drill the upper mount hole. Install a Hex Head Bolt, Split Lock Washer and Hex Nut, Tighten all of this hardware as well as the hardware installed in STEP6. Re-install the previously removed seat bottom cusion.

Run the speaker wire alongside the large harness (indicated by the arrow) to the front of the vehicle (in this installation, we ran the wire inside split loom (not included)), secure as neccessary using zip ties to ensure that there is no chance of the speaker wire getting entangelled in anything ie: moving parts for suspension, steering, hot exhaust...

S T E P 8

Looking from the front back through the front suspension, you can see the tunnel that the braided flexible brake line goes through as well as the big harness that was indicated in STEP7, Run the speaker wire alongside the large harness (indicated by the arrow) to the front of the vehicle, secure as neccessary using zip ties to ensure that there is no chance of the speaker wire getting entangelled in anything ie: moving parts for suspension, steering, hot exhaust...

S T E P 9

Run the speaker wire through the front of the vehicle, up under the hood, coming out near the other harnesses (as indicated by the arrow) secure as neccessary using zip ties to ensure that there is no chance of the speaker wire getting entangelled in anything ie: moving parts for suspension, steering, hot exhaust...

Route the wire to your chosen amplifier mounting location, secure and protect the wire as needed.

C O N G R A T U L A T I O N S !

You have completed the installation for this model! Enjoy your new Stealthbox®!

Page 2 • JL Audio, Inc 2009

Continued on Next Page

Page 2
Image 2
JL Audio SB-POL-RNGR700, MX-650, M-770x, XC-BCS12-25 warranty N G R a T U L a T I O N S, Do not Tighten AT this Time

XC-BCS12-25, MX-650, SB-POL-RNGR700, M-770x specifications

JL Audio is a renowned name in the world of high-performance audio solutions, especially for marine and powersports applications. Among their impressive lineup are the M-770x, SB-POL-RNGR700, MX-650, and XC-BCS12-25, all designed to deliver exceptional sound quality under challenging conditions.

The M-770x is a premium 7.7-inch marine speaker that boasts a robust design and superior sound clarity. Its UV-resistant polyethylene enclosure ensures durability against the harsh marine environment, while the stainless-steel hardware resists corrosion. Equipped with a injection-molded polypropylene cone and a rubber surround, the M-770x is optimized for both efficiency and fidelity. With a power handling of up to 100 watts RMS, this speaker can deliver powerful sound output, making it ideal for use on boats or other outdoor applications.

Next, the SB-POL-RNGR700 is a specially designed subwoofer enclosure for Polaris Ranger vehicles. This enclosure accommodates an 8-inch subwoofer, specifically engineered to provide deep bass without sacrificing space within the vehicle. The enclosure is constructed from marine-grade materials, ensuring it can withstand the elements while maintaining a clean and polished look. With its compact design, the SB-POL-RNGR700 integrates seamlessly into the vehicle, providing robust sound enhancement while preserving valuable cargo space.

The MX-650 is another standout from JL Audio, designed for marine use. This 6.5-inch coaxial speaker features a rugged construction, inheriting the same marine-grade materials to withstand moisture and UV exposure. With a peak power handling of 150 watts and a sensitivity of 90 dB, the MX-650 offers impressive volume and clarity, ensuring every note is crisp and every beat is felt. Its stylish design, available in several finishes, further enhances the aesthetic of any boat or marine setup.

Lastly, the XC-BCS12-25 is a 12-inch bass subwoofer that excels in providing powerful low-frequency sound. Its heavy-duty construction, along with a dual 2-ohm voice coil, enables the XC-BCS12-25 to perform at high levels while managing heat efficiently. Designed to pair with a variety of amplifier systems, it handles up to 750 watts RMS, delivering punchy and responsive bass that can dramatically elevate the entertainment experience in any setting.

Together, these products demonstrate JL Audio's commitment to quality, performance, and innovation, making them formidable choices for anyone looking to upgrade their audio experience in marine or off-road vehicles. Whether you're on the water or navigating rugged terrains, JL Audio's offerings ensure that sound quality is never compromised.