
Stealthbox®
I N S T A L L A T I O N G U I D E
for the
AdvanceTrac®)
START
HERE
➔ ➔ ➔
*Caution* You may be working on a Expedition that has side air bags, located in the front seats.We do ask for the removal of these front seats.
Disconnect the negative side of the battery and leave for 15min.This will allow for discharge of the air bags. Once the air bag wires have been disconnect, do not turn the ignition on. If you do, the computer will present an air bag fault.You may try to accomplish this install, by not removing this seat.
STEP 1: Using a
STEP 2: Using an 8mm socket, remove the pair of bolts that are located on both sides of the enclosure, towards the rear.
STEP 3: In the center console, remove the rubber liner. Using a 7mm socket, remove these four bolts.
This Stealthbox is a product which requires professional installation skills and tools.
Please read this installation guide thoroughly before beginning the project. It will guide you step by step through the installation. Several of the steps in this process may require two people to accomplish.
It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems: 1) The
2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.
Please enjoy your JL Audio Stealthbox responsibly.
➔ ➔ ➔
STEP 4: With a screwdriver remove the four | STEP 5: Using a | STEP 6: With a screwdriver, remove the six |
screws that are found around the top edge of | of bolts at the top corners of the storage | screws that secure the console lid. |
the storage bucket. | bucket. |
|
Continued on Next Page ➔
w w w . j l a u d i o . c o m | SB - F - EXPDCNSL/10W3v2, JL AUDIO, Inc 2004 | Pag e 1 | Sheet SKU#011106 Revision6/30/2004 |