JL Audio SB-T-TUNCNSL/10W3 manual Stealthboxtm

STEALTHBOXTM

SB-T-TUNCNSL/10W3

Fits 1999-UP Toyota Tundra with bucket seats/console

Installation of this Stealthbox requires professional installation skills and tools. Please read this installation guide thoroughly before beginning the project. It will guide you step by step through the installation. It is absolutely vital that the enclosure be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems: 1) The sub-bass performance will suffer due to the movement of the enclosure and 2) A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

STEP 1: Remove the console’s front tray to expose the front bolts. Remove the bolts.

STEP 2: Open the storage area lid and locate the two bolts inside the storage area. Remove the bolts.

STEP 3: Remove the console from the vehicle.

Picture #1

STEP 4: With the console out of the vehicle, remove the bottom half of the storage area. The top half will remain in place as shown in Picture #2.

STEP 5: Position the console shell over the Stealthbox.

Picture #2

STEP 6: Reinstall the front tray into the console.

Picture #3

Stealthbox SB-T-TUNCNSL/10W3 Stealthbox 2001 Sheet SKU# 011150 Revision 01/23/01