STEP 7: Flip the console and Stealthbox upside down. Using the existing holes on each side of the console as guides, drill 7/64” pilot holes into the Stealthbox.
Picture #4
STEP 8: Secure the console shell to the Stealthbox using the four supplied black
Picture #5
STEP 9: Using a 3/8” drill bit, drill out the two front factory console mounting holes.
CAUTION: Check under the vehicle for any loose brake lines, fuel lines or other hazards before drilling. Always wear eye protection when drilling.
Picture #6
STEP 10: Cut the factory carpet located between the factory console mounting holes down the middle.
Picture #7
Stealthbox | Stealthbox 2001 | Sheet SKU# 011150 | Revision 01/23/01 |
