TURN-ON LEAD
The XD700/5 uses a conventional +12V remote
The XD700/5’s “Remote”
INPUT SECTION
The XD700/5’s input section allows you to send signals to the amplifier section through the use of two, four or six
Input connections are via up to three pairs of traditional
If you wish to send six discrete channels into the XD700/5, simply use all six inputs and set the “Input Mode” switch in the “6 Ch.” position. The amplifier will automatically combine the Sub Ch. input signals to mono.
If you prefer to use only four channels of input into the XD700/5, set the “Input Mode” switch in the “4 Ch.” position and use the Ch 1 & 2 and Ch 3 & 4 Inputs. In this mode, the XD700/5 will derive its subwoofer channel signal from a sum of all four input signals. The bass will not fade when the signal is faded by the head unit from front to rear.
You may also choose to apply only two channels of input to deliver signal to all five amplifier channels. To do this, set the “Input Mode” switch to “2 Ch.” and use only the inputs to channels 1 & 2. In this mode, Channel 3 will operate with the Channel 1 signal and Channel 4 will operate with the Channel 2 signal. The amplifier will automatically combine the main input signals to mono for the Subwoofer Channel.
