![PACKAGE CONTENTS](/images/new-backgrounds/24520/2452011x1.webp)
PACKAGE CONTENTS
■
■Removable AC power cord x 1
■Snap and lock removable speaker connectors x 4
■Self adhesive rubber feet x 4
PREPARING FOR INSTALLATION
The local TV cables, Multizone Receiver cables and Speaker cables must reach the proposed location of the
Tools Required
■1/8" Slotted screwdriver
■1/4" Slotted screwdriver
■No.2 Phillips screwdriver
■Wire stripper
■Wire labels
INSTALLATION
1.Select an appropriate location for the
2.Run all necessary wiring to the
3.Strip 1/4" of insulation from the end of each wire. Tightly twist the end of each wire until no frayed ends remain.
4.Locate the Snap and Lock connectors and remove them if they are plugged in.
5.Use a small flathead screwdriver or your thumb to raise the locking tabs, exposing the holes on the connector.
4