JobSite Systems manual Installation Diagram, TROUBLESHOOTING AB50-X2will not power up

INSTALLATION DIAGRAM

TROUBLESHOOTING

AB50-X2 will not power up

Check to see that the AB50-X2 is plugged into an unswitched outlet.

Check to see that the POWER/ACTIVE LED is lit.

AB50-X2 will not activate (Current Sense Mode)

To Current Sensing Outlet

TV-Power

Cord

Right/

Left

TV Variable

Line Out

AB50-X2

AB50-X2

Make sure that the TV is plugged into the sensed outlet on the AB50-X2. May need to adjust sensitivity.

AB50-X2 will not activate (12V Trigger Mode)

Measure the voltage on the TRIGGER IN terminal. The voltage must be 3-30 VAC/DC to activate the AB50-X2.

Left Right

Check the polarity of 3.5mm mini-plug correct. (Tip=+12VDC; Sleeve=ground. DC only)

6 Speakers Multizone Receiver