JobSite Systems V-12/AWE manual Installation Diagram

6.Use a small flathead screwdriver or your thumb to raise the locking tabs, exposing the holes on the connector.

7.Insert each wire into the appropriate hole and snap down the locking tabs.

8.Insert the smooth side of the connector plug into the smooth side of the V-12/AWE socket.

9.Install the V-12/AWE into the all-weather enclosure.

10.Set the Impedance Magnification Switch as determined by the impedance charts.

11.Set the switches, on all of the controls, to the same position (1x, 2x, 4x, or 8x).

12.Attach the cover plate.

See installation diagram.

INSTALLATION DIAGRAM

Input From	V-12/AWE
Amplifier

V-12/AWE

Side View

Output to

Speakers

Stereo Receiver 5

Speakers