Using Speaker Selectors with IM Muting Volume Controls
Although IM controls provide volume and on/off at the
Tools Required
■1/8" Slotted screwdriver
■1/4" Slotted screwdriver
■No2 Phillips screwdriver
■Wire stripper
■Wire labels
INSTALLATION
1.Identify the Speaker wire and Amplifier wire. Label the wires for future reference.
2.Run the necessary wiring up through the conduit and the opening at the base of the enclosure.
3.Mount the entire enclosure atop the PVC conduit. Secure the enclosure with galvanized mounting screws.
4.Strip 1/4" of insulation from the end of each wire. Tightly twist the end
of each wire until no frayed ends remain.
5.Locate the snap and
lock connectors and remove them if they are plugged in. See
figure 5.
4 | Figure 5 |