John Lewis JLBIGH702 Electrical ConnectionsElectrical Connections, Electrical ConnectionsElectrical Connections Electrical Connections

Electrical ConnectionsElectrical ConnectionsElectrical ConnectionsElectrical ConnectionsElectrical Connections

THIS HOB MUST BE EARTHIS HOB MUST BE EAR

THIS HOB MUST BE EARTHEDTHED

THEDTHED

THED.....

Any electrical work required to install this hob should

be carried out by a qualified electrician or competent

person, in accordance with the current regulations.

Electrical RequirElectrical Requir

Electrical Requirementsements

ementsements

ements

Any permanent electrical installation must comply with the

latest I.E.E. Regulations and local Electricity Board

regulations. For your own safety this should be undertaken

by a qualified electrician, e.g. your local Electricity Board,

or a contractor who is on the roll of the National Inspection

Council for Electrical Installation Contracting (NICEIC).

Electrical Connections

This hob is designed to be connected to a 230 V 50 Hz AC

electrical supply.

Before switching on, make sure the electricity supply voltage

is the same as that indicated on the hob rating plate. The

rating plate is located on the bottom of the hob. A copy is

attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cables.

This has to be provided with a proper plug, able to support

the load marked on the identification plate. To connect the

plug to the cable, follow the recommendation given in diagram

aside. The plug has to be fitted in a proper socket.

In the event of having to change the fuse, a 3amp ASTA

approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the

wires in the mains lead are coloured in accordance with the

following code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

— Connect the green and yellow (earth) wire to the

terminal in the plug which is marked with the

letter 'E' or the earth symbol or coloured green

and yellow.

— Connect the blue (neutral) wire to the terminal

in the plug which is marked with the letter 'N' or

coloured black.

— Connect the brown (live) wire to the terminal in

the plug which is marked with the letter 'L' or

coloured red.

Upon completion there must be no cut, or stray strands of

wire present and the cable clamp must be secure over the

outer sheath.

A cut off plug inserA cut off plug inser

A cut off plug inserted into a 13 amp sockted into a 13 amp sock

ted into a 13 amp sockted into a 13 amp sock

ted into a 13 amp socketet

etet

is a serious safis a serious saf

is a serious safety (shock) hazarety (shock) hazar

ety (shock) hazarety (shock) hazar

ety (shock) hazard.d.

d.d.

d. Ensur Ensur

Ensur Ensur

Ensure thate that

e thate that

e that

the cut off plug is disposed of safthe cut off plug is disposed of saf

the cut off plug is disposed of safelel

elel

elyy

y.....

PP

Permanent Connectionermanent Connection

ermanent Connectionermanent Connection

ermanent Connection

In the case of a permanent connection, it is necessary that

you install a double pole switch between the hob and the

electricity supply (mains), with a minimum gap of 3 mm

between the switch contacts and of a type suitable for the

required load in compliance with the current electric

regulations.

The switch must not break the yellow and green earth cable

at any point.

EnsurEnsur

Ensure that the hob supple that the hob suppl

e that the hob supple that the hob suppl

e that the hob supply cable does noty cable does not

y cable does noty cable does not

y cable does not

come into contact with surfaces withcome into contact with surfaces with

come into contact with surfaces with

temperaturtemperatur

temperatures higher than 50 deg.es higher than 50 deg.

es higher than 50 deg.es higher than 50 deg.

es higher than 50 deg. C C

C C

C.....



Min. size Cable/flexMin. size Cable/flex

Min. size Cable/flex Cable / flex typeCable / flex type

Cable / flex typeCable / flex type

Cable / flex type FuseFuse

FuseFuse

Fuse

0.75 mm2H05 V2V2-F (T90) 3 A

SupplSuppl

Supply cable ry cable r

y cable ry cable r

y cable replacementeplacement

eplacementeplacement

eplacement

The cable used to connect the hob to the electrical supply

must comply to the specifications given below.

NeutralNeutral

Neutral

Earth (yellow/green)Earth (yellow/green)

Earth (yellow/green)

The manufacturer declines any liability shouldThe manufacturer declines any liability should

The manufacturer declines any liability should

these safety measures not be observed.these safety measures not be observed.

these safety measures not be observed.