As much as the advice does not lead to result, call the nearest
Replacing the lamp
1.Disconnect the mains plug from the mains socket.
2.Press on the rear hook and at the same time slide the lamp cover in the direction of the arrow.
3.Replace the lamp with one of the same power and specifically designed for household appliances. (the maximum power is shown on the light lamp cover)
4.Install the lamp cover by sliding it into its original position.
5.Connect the mains plug to the mains socket.
6.Open the door. Make sure that the lamp comes on.
Closing the door
1.Clean the door gaskets.
2.If necessary, adjust the door. Refer to "Installation".
3.If necessary, replace the defective door gaskets. Contact the Service Force Centre.
14
