John Lewis JLWD 1406 1400 Display Programme time, Selection of drying time in minutes

9 Display (Programme time)

The following pieces of information are shown on the display:

•Duration of washing programme in hours and minutes, after you have selected a programme (for example 2.05).

2.05

The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.

While the programme is running (after you have pressed the Start/Pause button), the displayed time value decreases by one unit every minute.

1.25

•The washer-dryer has stopped with water in the tub, at the end of the “Soak 30°”: this is indicated by a flashing zero.

•The washer-dryer has completed the programme: this is indicated by a flashing zero.

0

After starting the programme, the remaining time is updated every minute.

•Selection of drying time in minutes .

105

After starting the programme, the remaining time is updated every minute.

Important!

If you select a drying time longer then 55’ minutes, after 3 seconds, the display will show it in hours and minutes (see the example below).

Example:

60	1.
	1.00
Time	Time
dry	dry

•Delay start, a time value indicated in hours (23 hours max) and selected by means of the relevant button.

Delay

start

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown is updated every hour, and, for the last two hours, every 30 minutes.

•An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

13