17
Using your washing machine
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment of
the detergent drawer. Then run a cotton 90°C cycle,
without any laundry in the machine, to remove any
manufacturing residue from the drum and tub. Pour 1/2
a measure of detergent into the dispenser drawer and
start the machine.
WASHING 5 KG OF WHITE COTTON AT 90°C
Suppose you have 5 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.

1.Load the laundry

Open the door. Place the laundry in the drum, one item
at a time, shaking them out as much as possible. Close
the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment .
If you wish to carry out the prewash, a soak programme
or a stain phase, pour detergent or stain remover into
the appropriate compartment marked .
Important!
Do not use normal detergent for the “Stain” option,
always use a STAIN remover.

3.Measure out the fabric softener

If required, pour fabric softener into the compartment
marked , and bleach in to the compartment marked
, without exceeding the «MAX» mark.
JL002
P0004

4. Select the desired

programme
Turn the programme selector dial to the desired
position. The duration of the programme and the
maximum spin speed allowed for the selected
programme appear on the display.

5. Select the spin speed or «00 »

(No spin) option

Depress repeatedly the spin speed button to choose the
required speed or «00» (No Spin) option.

6. Select the desired options

Depress the button relevant to the selected option. The
corresponding light illuminates and the display shows the
description of the selected option.
1400 Extra rinse YES
h min
2.23
1400 Prewash Yes
h min
2.23
0 No spin
h min
2.23
1400 Cotton 90°
h min
2.23
1400 Cotton 90°
h min
2.23
john_lewis_rev4.qxp 9/15/2006 4:39 PM Page 17