![](/images/new-backgrounds/1246935/24693527x1.webp)
|
| h min |
0 | No spin | 2.23 |
Option selection
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the “Start/ Pause” button.
When you press an option button, (for ex. the Prewash ) the corresponding light illuminates and, on the display, appears the description of the selected function.
If you press the same button again, the button light goes out and the display shows that this option has been deactivated.
|
| h min |
1400 | Start in 30 min | 2.23 |
The countdown is updated every hour and for the last 2 hours, every 30 minutes.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message «Selection error» is displayed for about 3 seconds.
h min |
|
| h min |
1400 | Prewash Yes | 2.54 |
|
| h min |
1400 | Prewash No | 2.19 |
1400 | Selection error | 2.23 |
Alarm messages
In the event of operating problems, some corresponding messages are displayed (for more
Washing phases
During the washing cycle, the display will show the different washing phases.
information see paragraph “Something not working” at page 25).
Some of these problems are due to an incorrect use
|
| h min |
1400 | Washing | 2.05 |
|
| h min |
1400 | Spinning | 2.05 |
of your washing machine and are easy to resolve.
|
| h min |
1400 | No Incoming water | 2.23 |
Delayed start
The selected delay (20 hours max) set by means of the relevant button appears on the display for 5 seconds, then the selected programme displays.Press the Start/ Pause button to start the delay start.
End of programme
When the programme has finished (when the water has emptied out) and the light of the “Start/ Pause” button and the door locked light go out, then the door can be opened and the display will show alternatively the messages «Door openable» and «Cycle ended».
14