Using the GUIDE Plus+® electronic program guide05
56
En
• VPS/PDC works only with analog
stations; it does not work with digital TV
stations.
• VPS/PDC may not work with all
broadcast stations in your country/area.
Check with the stations for compatibility.
• The hours between 3:00 and 5:00 in the
morning are used by the GUIDE Plus+
system to download program
information. During these times, VPS/
PDC may not work reliably; leave VPS/
PDC off if you set a timer recording for
these times.
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time. This can be useful if
a broadcast program overruns, for example.
Canceling or extending the timer
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been canceled.
2 Press repeatedly to extend
recording in 30 minute blocks.
Stopping a timer recording
1 Press during a timer recording.
2 Select ‘Yes’ to confirm.
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCK
.
If any buttons are pressed on the remote or
front panel,
LOCK
is briefly displayed again.
•To unlock the recorder, press and hold
STOP
on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCK
.
REC
REC
STOP REC
ENTER
STANDBY/ON
DVR940HX_UK_EN.book 56 ページ ２００６年７月１２日 水曜日 午後４時５分