PYLE Audio DVR-940HX-S manual ProblemRemedy

17Additional information

HDMI

ProblemRemedy

The connected HDMI or • Try disconnecting then reconnecting the HDMI cable (while the

DVI device does not	power of both components is on).
display any picture	• Try switching the power of the HDMI/DVI device off then back on.
(and the front panel	• Try switching off the HDMI/DVI device and this recorder. Next,
HDMI indicator does	switch on the HDMI/DVI device and leave it for around 30 seconds,
not light)	then switch on this recorder.
	• When you connect an HDMI-compatible device make sure of the
	following:
	– The connected device’s video input is set correctly for this unit.
	– The cable you’re using is fully HDMI-compliant. Using a non-
	standard cable may result in no picture being output.
	– Don’t use several HDMI cables connected together. Use a single
	cable to connect devices together.
	• When you connect a DVI-compatible device make sure of the
	following:
	– The connected device’s video input is set correctly for this unit.
	– The DVI terminal on the connected device is HDCP-compatible.
	– The connected device is compatible with NTSC (720 x 480i/p, 1280 x
	720p, 1920 x 1080i, 1920 x 1080p (DVR-940HX-S only)) and PAL (720 x
	576i/p, 1280 x 720p, 1920 x 1080i, 1920 x 1080p (DVR-940HX-S only))
	video input.
	• If the HDD is damaged or broken, there will be no HDMI output.
	• Not all HDCP-compatible DVI devices will work with this recorder.
No video from the	If you choose a setting that is incompatible with your TV you may not
HDMI output.	be able to see any picture at all. In this case, press ONE TOUCH COPY
	while holding down the (STOP) button on the front panel to switch
	the setting (this also switches Component Video Out on page 141 to
	the default setting).

There’s no sound from the connected HDMI or DVI device.

•There is no sound when using a DVI terminal.

•Some HDMI-compatible devices do not output sound (check with the manual that came with the connected device).

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

160

En