PYLE Audio DVR-940HX-S Shows ‘LOCK’ when a Button is pressed Can’t use One Touch, Copy HDD to DVD

Additional information		17
Problem	Remedy

After briefly unplug- ging or after a power failure the front panel display shows ‘--:--’

•A backup battery inside the recorder keeps the clock and other settings from being reset when there is no power to the recorder. After unplugging or a power failure, the battery keeps all settings for a period of several minutes. Reset the clock and other recorder settings to use the recorder again.

Front panel display	• The Child Lock is on; turn off in order to use the recorder (page 56).
shows ‘LOCK’ when a
button is pressed
Can’t use One Touch	• Make sure that there is a recordable DVD-R/-RW loaded with some
Copy (HDD to DVD)	free space for recording and fewer than 99 titles already on the disc.
	Also make sure that for a Video mode disc or a DVD+R, the disc isn’t
	finalized.
	• Make sure there is a recordable DVD+R/+RW loaded with some
	free space for recording and fewer than 49 titles already on the disc.
	• If you delete a title from a DVD+R/+RW disc, the number of
	remaining recordable titles may not decrease.
	• Further recording is not possible on a finalized DVD+R. Check that
	there isn’t a disc menu on the disc you’re trying to use.
	• If the title currently playing contains material that is copy-once
	protected, One Touch Copy will not work.
	• One Touch Copy can’t be used for titles over 8 hours long when
	copying to DVD+R/+RW (though you can use a DVD+R DL).
	• One Touch Copy can’t be used for MN1 to MN6, SEP, SLP or EP titles
	when copying to DVD+R/+RW.
	• One Touch Copy doesn’t work if the recorder is already recording to
	DVD.
Can’t use One Touch	• Make sure that there is space available on the HDD and that there
Copy (DVD to HDD)	are fewer than 999 titles on the HDD.
	• One Touch Copy doesn’t work if the recorder is already recording to
	the HDD.
	• DVR-940HX-S:One Touch Copy cannot be used to copy from DVD to
	the external HDD (HDD2).
The picture freezes and	• Press STOP then try restarting playback.
the front panel and	• Press the front panel STANDBY/ON button to switch the power
remote control buttons	off, then switch back on and restart playback. If the power fails to
stop working	switch off, press and hold STANDBY/ON for 5 seconds until the
	power switches off.
A device connected via	• Check that it is a device that may be connected to this unit (digital
USB does to function.	camera, USB memory, memory card reader or printer).

•Use a USB cable less than 5 m in length.

•Check that the USB cable is inserted fully.

•Check that the USB device is powered on.

•Only the first digital camera, USB memory or memory card reader connected is readable by this unit. Unplug multiple devices and

connect the device you want to use first. 159

En