PYLE Audio DVR-940HX-S manual Getting started, Select your country, Auto-tuning channels

Getting started 04

•The country setting will apply to both the digital and analog TV tuners.

•The clock will also be set automatically here if D.TV channels are found.

•If no new channels were found a message appears asking if you want to scan again. Check the aerial connection before selecting Yes. (If you select No, skip to step 8 below.)

ENTER

8Select the analog TV (A.TV) Auto Channel Setting (‘Auto Scan’ or ‘Download from TV’), or ‘Do not set’.

k SettingAutoChannel Setting

Line System

er Save	AutoEnglishScan
P	Download from TV

p Navigator Do not Set

•Select Do not set if you want to skip channel setup (because they have already been set up, for example).

•You can only use the Download from TV feature if this recorder is connected to your TV using a fully-wired 21-pin SCART cable via the AV1(RGB)-TVconnector, and if your TV supports this function (check your TV’s instruction manual for more details).

ENTER

•Select your country.

k SettingCountry Selection
t Line System
er SaveCountry	UK
P

•Auto-tuning channels

The Auto Scan option automatically scans and sets the channel presets.

Tuning

32/99

Cancel

•Downloading channels from your TV Use the Download from TV option to download all the channels that your TV is tuned to.

Downloading Pr 5

32/99

Cancel

ENTER

9Select ‘Auto’ for automatic time setting, or ‘Manual’ to set the clock manually.

If the clock was already set from a D.TV channel in step 6, this step is skipped.

kSettingClock Setting Line System

er Save Auto

PManual

•Auto clock setting

Some TV channels broadcast time signals together with the program. This recorder can use these signals to set the clock automatically.

Set ‘Clock Set CH‘ to the channel preset number that broadcasts a time signal, then move the cursor down to ‘Start’ and press ENTER.

k SettingAutoClock Setting

Line System	––	/	–– / ––––
Date
er Save
P Time	––	:	––
p Navigator			Pr 1
Clock Set CH
			Start

The recorder takes a short while to set the time. After you see that it’s set, select Next to proceed.

k SettingAutoClock Setting

Line System

Date SUN 01 / 01 / 2006 er Save

P Time	11 : 20
p Navigator	Pr 1
Clock Set CH
	Start
	Next

If the time could not be set automatically, press RETURN/EXIT to go

back to the previous screen and select 37 Manual.

En