PYLE Audio DVR-940HX-S manual Recording Using the built-in A.TV and D.TV tuners, Changing channels

Recording

Using the built-in A.TV and D.TV tuners

Switching between A.TV and D.TV tuners

A.TV/D.TV

•DVR-940HX-S:

SHIFT A.TV/D.TV

•DVR-545HX-S: +

Press to switch between D.TV (digital) and A.TV (analog).

07

Tip

•When changing terrestrial digital broadcast channels, channels with a low signal strength may result in a black screen being displayed.

•For other channels, it may take a short while for the channel picture to appear, and/or for the channel number to appear.

•In both of the above cases, some improvement may be possible by adjusting the antenna.

Changing channels

There are a number of ways to select analog

and digital TV channels.1 Note that you can’t change the TV channel during playback, recording or during recording standby.

CHANNEL

+

• DVR-940HX-S:		–	Smart Jog
		CHANNEL
		PREV	NEXT
• DVR-545HX-S:		CHANNEL	CHANNEL +/–
	buttons
•	Number buttons

For example, to select channel 4 (digital channel D004), press 4 then ENTER; for channel 34 (digital channel D034), press

3, 4, ENTER.2

• CH +/– buttons on the front panel

Using the D.TV Channel List

When in D.TV mode, you can call up the on- screen Channel List anytime by pressing

ENTER. Use the buttons to select a channel, then press ENTER to switch to that

channel.1

D001 ************

D002 ************

D003 ******

D004 ************

D005 ****

D006 ******

•For D.TV channels only, you can also use the Channel List—see below.

Note

1 • If you select a locked channel, you will need to enter your password to access it.

•While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for 3 minutes.

2 Analog channel presets are numbered 1 to 99; digital channel presets are numbered D001 to D999.

69

En