PYLE Audio DVR-940HX-S manual Connecting up Using other types of audio/ video output

02Connecting up

Using other types of audio/ video output

If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video and component video output.

Using the supplied audio/video cable

Using the S-video or component video output

AUDIO
INPUT
COMPONENT	S-VIDEO
VIDEO INPUT	INPUT
	1
	TV

2

	AUDIO
	INPUT
	VIDEO
	INPUT
	TV
	2		1
	COMPONENT			OUT
	VIDEO OUT		IN
	PB	Y			ANTENNA
			CONTROL	G-LINK	(DIGITAL)
AC IN	AV 2 (INPUT 1/DECODER)		S-VIDEO		IN
	OUTPUT
						DIGITAL
				IN	OUT	AUDIO OUT
				ANTENNA
				INPUT3

AV 1 (RGB) – TV R AUDIO L VIDEO COAXIAL

HDMI OUT

COMMON INTERFACE

									HDMI OUT
			COMPONENT			OUT
			VIDEO OUT		IN
	PR		PB	Y			ANTENNA
					CONTROL	G-LINK	(DIGITAL)
AV 2 (INPUT 1/DECODER)					S-VIDEO		IN
AC IN	OUTPUT
								DIGITAL
						IN	OUT	AUDIO OUT
						ANTENNA
						INPUT3
AV 1 (RGB) – TV	R	AUDIO	L					COAXIAL	COMMON INTERFACE

1Connect the S-video or component video output to a similar input on your TV.

For an S-video connection, use an S-video cable (not supplied) to connect the S-VIDEO OUTPUT jack to an S-video input on your TV.

1Connect the VIDEO OUTPUT jack to a video input on your TV.

Use the yellow jack of the supplied audio/ video cable for the video connection.

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

Use the red and white jacks of the supplied audio/video cable for the audio connection. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

For a component video connection, use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV.

See also Component Video Out on page 141 for how to set up the component video output for use with a progressive scan- compatible TV.

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

You can use the supplied audio/video cable, leaving the yellow video plug disconnected. Make sure you match up the left and right outputs with their corresponding inputs for

correct stereo sound.

18

En