PYLE Audio DVR-940HX-S manual Selecting other languages for language options, About Ntsc on PAL TV

The Initial Setup menu

About NTSC on PAL TV

Depending on the Input Line System setting and the NTSC on PAL TV setting, the signal format output when the recorder is stopped varies as shown in the table below.

Input Line	NTSC on PAL	Output
		when
System	TV	stopped
625 System	Off	PAL
	On	PAL
525 System	Off	NTSC
	On	PAL–60

About the input colour system

The available options of the Input Colour System setting depend on the Input Line System setting. The table below shows the different options available.

Input Line	Built-in	External
System	analog tuner	input
625 System	Auto	Auto
	PAL	PAL
	SECAM	SECAM
525 System	n/a	Auto
		3.58 NTSC
		PAL–60

16

Selecting other languages for language options

ENTER

1Select ‘Other’ from the language list.

This option appears in the settings for DVD Menu Language, Audio Language, and Subtitle Language.

ENTER

2	Select the language you
want.
Initial	Setup
Basic		OSD DVD Menu Language
Digital Tuner		Audio Language	English
Analogue	Tuner	Language
		Subtitle Language
Video In/Out		Auto LanguageNumber 0	5 1 4
Audio In		DVD Menu Language
LanguageAudio Out		Subtitle Display
Language
Recording

•Select by language name: Use the buttons to change the language.

• Select by code number: Press then use the number buttons to enter the four-digit language code.

See Language code list on page 164 for a list of available languages and corresponding codes.

Additional information about component video output

If you switch the Component Video Out setting to Progressive when using a TV that is not compatible with progressive-scan video, you will not be able to see anything displayed on your TV. If this happens, press and hold the STOP button on the front panel, then press ONE TOUCH COPY. This will set the recorder’s video output back to Interlace.

151

En