PYLE Audio DVR-940HX-S manual Getting started Chapter, Switching on and setting up

04Getting started

Chapter 4

Getting started

Switching on and setting up

When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output.

If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.

1Switch on your TV and set the video input to this recorder.

4 ENTER Start the Setup Navigator.

k Setting

Complete this setup before you t Line System

start using your recorder. er Save

PStart

p Navigator Cancel

Please use the Initial Setup if you want to make more detailed settings.

• If you don’t want to use the Setup Navigator, press to select Cancel, then press ENTER to exit the Setup Navigator.

STANDBY/ON ENTER

2 Switch on the recorder.

When you switch on for the first time, your TV should display the Setup Navigator screen (If the Setup Navigator doesn’t appear, you can also access it from the Initial Setup menu; see page 137).

•If this recorder is connected to a compatible TV using a fully-wired 21-pin SCART cable, the recorder will take a few seconds to download country, TV screen size and language information. (Check the manual that came with your TV for compatibility information.)

ENTER

3Choose a language (then press ENTER).

5 Select an Aerial Power setting1 for the built-in digital tuner.

•On: power is always supplied to the connected aerial, whether the recorder is on or in standby.

•Auto: power is only supplied when this recorder is on.

•Off: power is never supplied to the aerial.

6	ENTER
	Select ‘Auto Scan’ to start

scanning for D.TV channels.

•Select Do not set if you want to skip D.TV channel setup (because they have already been set up, for example), then skip to step 8 below.

Initial Setup

Basic

Digital Tuner

Analogue Tuner

Video In/ O ut

Audio In

Audio O ut

Language

Recording

Clock SettingLanguage

Input Line System Power Save

HELP

EPG

Pause Live TV

Setup Navig ator

ENTER

7Select your country. The recorder starts scanning for new channels. After the scan is complete the recorder will let you know how many new channels were found.

36

En

Note

1If the recorder does not accept the On or Auto setting (the highlight jumps back to Off), check that the antenna is properly connected and that it is not shorted, then try making the setting again.