PYLE Audio DVR-940HX-S manual Connecting up Connecting an external decoder box, Scart AV Connector

Connecting up 02

Connecting an external decoder box (1)

If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this page. See the previous page for how to connect the G-LINK™ cable.

Important

SCART AV

CONNECTOR

4

TV

			COMPONENT		OUT
			VIDEO OUT
	PR		PB	Y	IN	ANTENNA
					CONTROL G-LINK	(DIGITAL)
AV 2 (INPUT 1/DECODER)					S-VIDEO	IN
AC IN	OUTPUT
					IN		DIGITAL
						OUT	AUDIO OUT
					ANTENNA
					INPUT3
AV 1 (RGB) – TV	R	AUDIO	L		VIDEO		COAXIAL

HDMI OUT

COMMON INTERFACE

•Do not connect your decoder box directly to this recorder.

•Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off (in standby).

•For timer recording to work properly on this recorder, the VCR/satellite receiver/ cable box must also be switched on during recording.

•It is not possible to watch one TV program and record another using this setup.

				3
	SCART AV	2			SCART AV
	CONNECTOR				CONNECTOR
Decoder			VCR/Satellite receiver
			/Cable box			ANTENNA

IN

1

Antenna/cable TV wall outlet

1Connect the cable from the antenna/ cable TV outlet to the antenna input on your VCR/satellite receiver/cable box.

2Use a SCART cable (not supplied) to connect your decoder to your VCR/ satellite receiver/cable box.

See the manual for your decoder box for more detailed instructions.

3Use a SCART cable to connect your VCR/satellite receiver/cable box to the AV2(INPUT 1/DECODER) AV connector on this recorder.

4Use a SCART cable to connect the AV1(RGB)-TV AV connector to your TV.

21

En