PYLE Audio DVR-940HX-S Screen Resolution 1920 x 1080p Constant 1920 x 1080p output, Line system

16The Initial Setup menu

Setting	Options	Explanation
HDMI Output (only available when an HDMI device is connected)
Screen Resolution	1920 x 1080p	Constant 1920 x 1080p output.
	(DVR-940HX-S only)
	1920 x 1080i	Constant 1920 x 1080i output.
	1280 x 720p	Constant 1280 x 720p output.
	720 x 576p	Constant 720 x 576p output (for use with the 625
		input line system).
	720 x 480p	Constant 720 x 480p output (for use with the 525
		input line system).
	720 x 576i	Constant 720 x 576i output (for use with the 625 input
		line system).
	720 x 480i	Constant 720 x 480i output (for use with the 525 input
		line system).

If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case, press ONE TOUCH COPY while holding down the (STOP) button on the front panel to switch the setting (this also switches Component Video Out on page 141 to the default setting).

4:3 Video Output	Full	Select if your HDMI TV allows you to change the
		aspect ratio.
	Normal	Select if your HDMI TV does not allow you to change
		the aspect ratio. 4:3 video will be shown with bars on
		each side (unless the Screen Resolution setting
		(above) is set to 720 x 480i or 720 x 576i).
Colour	RGB (0–255)	Use if colours are weak and black appears to ‘float’
		on the RGB (16–235)setting.
	RGB (16–235)	Use this setting if colours appear overly rich and the
		black too deep on the RGB (0–255)setting.
	YCbCr 4:2:2	The video signal is output as a 10-bit YCbCr 4:2:2
		component signal. This is the standard setting for
		HDMI-compatible devices.
	YCbCr 4:4:4	The video signal is output as a 8-bit YCbCr 4:4:4 com-
		ponent signal.

•Depending on the connected device some settings may not be available.

•When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.

148

En