PYLE Audio DVR-940HX-S manual TV listings information doesn’t update

Using the GUIDE Plus+® electronic program guide 05

•I used the One-Button-Record feature (red Action button) to set a recording, but I recorded the wrong channel.

If the channel to be recorded is received via the external receiver first make sure that the external receiver was left switched on. Next, in the Editor Area, make sure that the channel to be recorded is correctly set: Access the Editor Area. Check the source and program number of the channel that you wanted to record. Change the source and preset numbers if incorrect.

If you are recording from the recorder’s internal tuner (the A.TV or D.TV setting), make sure that the program number is the same as the preset number set on this recorder. If they are different, go to the Editor Area and change the program number to match the recorder’s preset number.

•The TV listings information doesn’t update.

The latest TV listings information is automatically downloaded by the recorder overnight. This only happens if the recorder is in standby; if the recorder is left on, it will not download. When not using the recorder, please switch it into standby.

Data downloads can take several hours. The front panel display shows EPG when downloading. If you switch the recorder on while EPG is displayed, the download will be canceled.

•The GUIDE Plus+ system is not supported in my area, but when I switch the recorder into standby, after a while the front panel display shows EPG. Can I stop this from happening?

If the GUIDE Plus+ system is not supported in your area, please do not set the postal code in the GUIDE Plus+ setup (see Setting up the GUIDE Plus+® system on page 40). When the GUIDE Plus+ service starts in your area, please set the postal code again.

•The automatic Host Channel search failed or the GUIDE Plus+ system identified the wrong Host Channel for my region.

You can identify your Host Channel manually. See Manual Host Channel setup on page 59 for how to do this.

61

En