PYLE Audio DVR-940HX-S manual Copying and backup, Using Copy Lists, Copying from HDD to DVD

Copying and backup

•When HDD Recording Format is set to Video Mode Off, titles recorded in LP/ MN9 to MN15 modes cannot be high- speed copied to a Video mode disc. Please use a VR mode DVD-R/-RW or DVD-RAM.

•Recordings of bilingual broadcasts cannot be high-speed copied to a Video mode DVD. Please use a VR mode DVD- R/-RW or DVD-RAM.

•Titles over 8 hours cannot be copied to single-layer DVD+R/+RW discs using One Touch Copy. Use DVD+R DL discs for titles over 8 hours.

•Titles recorded in MN1 to MN6, SEP, SLP or EP mode cannot be copied to DVD+R/ +RW using One Touch Copy.

•DVR-940HX-S:When high-speed copying from the internal or external HDD to DVD, it is not possible to play from or record to the other connected HDD.

Copying to the (internal) HDD

•The maximum title length for copying is 12 hours.

•Title name and chapter markers are also copied, except when copying from a finalized Video mode disc.

•Thumbnail picture markers and chapter markers for the Disc Navigator are copied, but their position in the copy may be slightly changed from the original.

•If some part of the title being copied is copy-protected, copying will start, but the copy-protected portions will not be copied.

•DVR-940HX-S:Copying to the external HDD (HDD2) is not possible.

11

Using Copy Lists

* See also Copyright on page 109.

At its simplest, a Copy List is just a list of HDD or DVD titles that you want to copy. When copying HDD titles to DVD, you can, however, edit the titles in your copy list, erasing chapters you don’t need, or re- naming titles, for example. Edits you make to titles in the Copy List do not affect the actual video content; only the ‘virtual’ content of the Copy List. So you can freely erase and modify anything in your Copy List safe in the knowledge that the actual content is not being altered.

Copying from HDD to DVD

Important

•The recorder can only store one Copy List at a time.

•The Copy List is erased if the Input Line System setting is changed (see Additional information about the TV system settings on page 150).

•Resetting the recorder to its factory settings (see Resetting the recorder on page 167) will erase the Copy List.

1Load a recordable DVD.

•It is possible to complete the following steps without having a recordable DVD loaded (or having an uninitialized DVD loaded); however, the steps are slightly different.

•If you want to use a DVD-RW (VR mode) disc for the copy, make sure it is initialized before you start.

2HOME MENU Select ‘Copy’ from the Home Menu.

111

En