PYLE Audio DVR-940HX-S manual Connecting up Connecting to an AV amplifier/receiver

Connecting up 02

Connecting to an AV amplifier/receiver

To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the digital coaxial output.

In addition to a digital connection, we recommend also connecting using the stereo analog connection for compatibility with all discs and sources.

You’ll probably also want to connect a video output to your AV amplifier/receiver. Use the ordinary video output (as shown here), or the S-video output.

Important

•Noise may be output from your speakers if the recorder is not set up to work with your AV amplifier/receiver properly (see Audio Out on page 143).

•When watching D.TV only linear PCM audio is output from the coaxial digital out jack.

•Do not connect this recorder to your TV ‘through’ your VCR using A/V cables. Always connect it directly to your TV.

		VIDEO
		IN
	TV	4
AUDIO/VIDEO		VIDEO
		OUT
IN
		DIGITAL
		IN
		2

3					AV amp/receiver
								HDMI OUT
			COMPONENT		OUT
			VIDEO OUT
	PR		PB	Y	IN	ANTENNA
					CONTROL G-LINK	(DIGITAL)
AV 2 (INPUT 1/DECODER)					S-VIDEO	IN
AC IN	OUTPUT
							DIGITAL
					IN	OUT	AUDIO OUT
					ANTENNA
					INPUT3
AV 1 (RGB) – TV	R	AUDIO	L		VIDEO		COAXIAL	COMMON INTERFACE

1Connect your TV antenna to the recorder and TV.

See Connecting a TV antenna on page 16 for details.

This enables you to watch and record TV channels.

2Connect the DIGITAL OUT COAXIAL jack on this recorder to a coaxial digital input on your AV amplifier/receiver.

This enables you to listen to multichannel surround sound.

3Connect the analog AUDIO OUTPUT and VIDEO OUTPUT jacks on this recorder to an analog audio and video input on your AV amplifier/receiver.

4Connect the AV amplifier/receiver’s

video output to a video input on your TV.

23

En