The Video Adjust menu15

136
En
• CNR
– Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component (only possible when
connected using HDMI).
• BNR
– Adjusts the amount of noise
reduction (NR) applied to the block noise
(artefacts visible in areas of flat colour,
caused by MPEG compression).
•
MNR
– Adjusts the amount of noise
reduction (NR) applied to the mosquito
noise (artefacts visible around the edges
of an image, caused by MPEG
compression).
•
Sharpness
– Adjusts the sharpness of
the high-frequency (detailed) elements
in the picture.
•
Detail
– Adjusts how sharp edges
appear.
•
White Level
– Adjusts the intensity of
white.
•
Black Level
– Adjusts the intensity of
black.
•
Black Setup
– Corrects the standard
reference black level (NTSC video
playback on the
Interlace
video output
setting only). (Black Setup is ineffective
for HDMI output.)
•
Gamma Correction
– Adjusts the
brightness of darker images.
•
Hue
– Adjusts overall balance between
red and green.
•
Chroma Level
– Adjusts how rich the
colours appear.
4 Use the
/
buttons to adjust the
currently selected picture quality setting.
5When you have all the settings as you
want them, press HOME MENU to exit.
Tip
•To see more of the picture as you adjust
different settings, press
ENTER
after
selecting the setting you want to adjust.
•YNR and Detail are ineffective for analog
and component video when the
Video
Priority Mode
is set to
HDMI
. Set to
Component
to make effective for both
analog and HDMI video. See page 149.
DVR940HX_UK_EN.book 136 ページ ２００６年７月１２日　水曜日　午後４時５分