PYLE Audio DVR-940HX-S manual CH Setting on

02Connecting up

Connecting an external decoder box (2)

If you only have a decoder, connect it to this recorder and your TV as shown on this

page.1

Using the setup on this page you can:

•Record scrambled channels received using the recorder’s built-in analog TV tuner.

SCART AV

CONNECTOR

2

TV

	COMPONENT			OUT
	VIDEO OUT	Y	IN
PR	PB			ANTENNA
			CONTROL G-LINK	(DIGITAL)
AV 2 (INPUT 1/DECODER)			S-VIDEO	IN

AC IN OUTPUT

						DIGITAL
				IN	OUT	AUDIO OUT
				ANTENNA
				INPUT3
AV 1 (RGB) – TV	R	AUDIO	L	VIDEO		COAXIAL

HDMI OUT

COMMON INTERFACE

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/ receiver.

3

SCART AV

CONNECTOR

Decoder

1Connect your TV antenna to the recorder and TV.

See Connecting a TV antenna on page 16 for details.

2Use a SCART cable (not supplied) to connect the AV1(RGB)-TV AV connector to a SCART AV connector on your TV.

This enables you to watch discs.

3Use another SCART cable to connect the AV2(INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box.

This enables you to record scrambled TV channels.

Note

1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:

• Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 142).

22• From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual

En CH Setting on page 140).