PYLE Audio DVR-940HX-S manual Nicam

16The Initial Setup menu

Setting	Options	Explanation
AV2/L1 In	Video •	Sets the AV2(INPUT 1/DECODER) SCART input to
		standard composite video.
	S-Video	Sets the AV2(INPUT 1/DECODER) SCART input to S-
		video.
	RGB	Sets the AV2(INPUT 1/DECODER) SCART input to
		RGB.
	Decoder	Use this setting if you connected a decoder to the
		AV2(INPUT 1/DECODER) SCART connector. For
		scrambled channels, make sure that the channel
		Decoder setting is set to On. (See Manual CH Setting
		page 140.)

When the Input Line System is set to 525 System, RGB cannot be selected.

Even when set to RGB. depending on the connected device, the input signal may be composite video.

NTSC on PAL TV	On •	NTSC discs will play correctly on PAL-only TVs.
	Off	Use if your TV is already NTSC-compatible.

Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with your TV. See also About NTSC on PAL TV on page 151 for related information.

Audio In

NICAM Select	NICAM •	Record the NICAM audio in a NICAM broadcast.
	Regular Audio	Record the non-NICAM audio in a NICAM broadcast.
		(You can still switch the audio to record using the
		AUDIO button before recording.)
Analog Tuner Level	Normal •	Standard setting.
	Compression	Use if the audio level from the built-in tuner is exces-
		sive, causing distortion.
External Audio	Stereo •	Select if the audio from the currently selected exter-
		nal input is standard stereo.
	Bilingual	Select if each channel carries a separate soundtrack.

When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or bilingual. This has priority over the setting you make here.

Bilingual Recording A/L •		Record the left (A) channel of a bilingual source
		when recording to HDD with HDD Recording Format
		set to Video Mode On, to DVD in Video mode or in
		LPCM mode, from an external source.
	B/R	As above, but for right (B) channel recording.

When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.

142

En