08Playback

Playing CDs and WMA/MP3 discs

The table below shows the basic playback

controls for audio CDs1, and WMA/MP3 files.

Press to start playback.

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you can select

STOP Press to stop playback.

PAUSE Pauses playback, or restarts

playback when paused.

Except WMA: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3

disc). (During playback you can also use the front panel CH +/– buttons.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number

CLEAR CLEAR

entry and start again.

ENTER

what to watch.2

 

 

 

 

 

 

Press to start playback.

 

 

 

 

 

 

Video CD only: If RESUME is dis-

 

 

 

 

 

 

played on-screen, playback

 

 

 

 

 

 

starts from the place last

 

 

 

 

 

 

stopped.

 

 

 

 

 

 

 

 

 

 

 

 

 

Press to stop playback.

 

 

STOP

 

 

 

 

 

 

Video CD only: You can resume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback from the same point

 

 

 

 

 

 

 

 

 

 

 

 

by pressing PLAY. (Press

 

 

 

 

 

 

STOP again to cancel the

 

 

 

 

 

 

resume function.)

 

 

 

 

 

 

 

 

 

 

 

Pauses playback, or restarts

 

 

 

PAUSE

 

 

 

 

 

 

playback when paused.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press to start scanning. Press

 

 

 

 

 

 

 

 

 

 

 

 

repeatedly to increase the scan-

 

 

 

 

 

 

 

 

 

 

 

 

ning speed.

 

 

 

 

 

 

 

PREV NEXT

Press to skip to previous/next

 

 

 

 

 

 

track.

 

 

 

 

 

 

When a PBC menu is dis-

 

 

 

 

 

 

played, press to display the pre-

 

 

 

 

 

 

vious/next page. (During

 

 

 

 

 

 

playback you can also use the

 

 

 

 

 

 

front panel CH +/– buttons.)

 

 

 

 

 

 

 

Note

1If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected

using the AUDIO (DVR-940HX-S) or SHIFT + 4 (DVR-545HX-S) button (see Switching audio channels on page 92).

2When playing in PBC mode, some playback features, such as search, repeat and program play are not avail-

84 able. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc Navigator

En

(see Using the Disc Navigator with playback-only discs on page 87).

Page 84
Image 84
PYLE Audio DVR-940HX-S manual Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs