PYLE Audio DVR-940HX-S manual Playback Chapter, Introduction, Basic playback

Playback

Chapter 8

Playback

Introduction

Most of the features described in this chapter make use of on-screen displays. Navigate these using the cursor buttons and ENTER. To go back one level from any screen, use the RETURN/EXIT button.

Remember also that the button guide at the bottom of every screen shows which buttons do what.

Many of the functions covered in this chapter apply to the HDD, DVD discs, Video CDs, Super VCDs, WMA/MP3/DivX discs and CDs, although the exact operation of some varies slightly with the kind of disc loaded.

•Many functions are not available when a Video CD is playing in PBC mode. Start playback from the Disc Navigator screen for non-PBC playback (see Using the Disc Navigator with playback-only discs on page 87).

•For discs that contain JPEG picture files, see The PhotoViewer on page 122.

Basic playback

A L L

This section shows you how to use your recorder for playback of discs (DVD, CD, etc.), and for playback of video from the HDD.

Important

•Throughout this manual, the term ‘DVD’ means any kind of playable or recordable DVD. If a function is specific to a particular kind of DVD disc, it is specified.

•Some DVD-Video, DVD+R and DVD+RW discs don’t allow certain playback controls to operate at certain points in the disc. This is not a malfunction.

HDD/DVD

1 Select the HDD1 or DVD for playback.

•If playing video from the HDD, skip to step 3 below.

•Select DVD for any kind of disc playback.

OPEN/CLOSE

2 [Front panel] Load a disc. Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sidedDVD-Video disc, load it with the side you want to play face down).

•If you want to play a DTS audio CD, please first read the note on page 84.

08

Note

1 DVR-940HX-S:If the external HDD is connected and available for playing, you can select it here.

81

En