PYLE Audio DVR-940HX-S manual Playback, Playing DVD discs, Start playback, DVD+R/DVD+RW only

08Playback

3 Start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•When playing video from the HDD, playback will automatically stop after the end of a title is reached.

•There may be a slight pause when playback switches from the first to the second layer of a dual-layer disc.

•See the following sections for more details on playing specific kinds of discs.

STOP

4 Press to stop playback.

5When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

				Press to start playback.
				If RESUME is displayed on-
				screen, playback starts from
				the place last stopped.
				Press to stop playback.
		STOP
				You can resume playback from
				the same point by pressing
				PLAY. (Press STOP again to
				cancel the resume function.)
				Pauses playback, or restarts
			PAUSE
				playback when paused.
				Press to start scanning. Press
				repeatedly to increase the scan-
				ning speed.
				Press to skip to previous/next
PREV NEXT
				chapter/title. (During playback
				you can also use the front panel
				CH +/– buttons.)
				DVD+R/DVD+RW only:
				PREV may not always skip to
				the previous title.
				Except VR mode: During play-
				back, enter a chapter number
				then press ENTER to skip
	CLEAR CLEAR			directly to that chapter within
				the currently playing title.
				On some discs, you can also
		ENTER		use the number buttons to
				select numbered items in the
				disc menu.
				VR mode only: During playback,
				enter a title number then press
				ENTER.
				All: Press CLEAR to clear a
				number entry and start again.

82

En