PYLE Audio DVR-940HX-S Additional information about the TV system settings, Only, Pass Through

16The Initial Setup menu

Setting	Options	Explanation
AV. Link	This Recorder	Signals received through the AV input when the
	Only •	recorder is in standby are not passed through to the
		AV output.
	Pass Through	Signals received when in standby are passed though
		to the output for connected devices. (Note that dur-
		ing EPG data download, the EPG data is not passed
		through.)

When set to Pass Through, make sure to set Power Save (page 137) to Off.

DivX VOD	Registration Code	Use to display the recorder’s DivX registration code.
		See DivX video compatibility on page 10 and DivX®
		VOD content on page 11.
Set Preview	Quick Preview •	When in the Disc Navigator, the thumbnail video
(HDD only)		plays short excerpts from throughout the selected
		title. (Note that edited titles that will play normally
		from the beginning.)
	Normal	The thumbnail video plays from the beginning of the
		title.
CI Information	Next Screen	This option displays a menu of CI card functions.
		Consult your service provider for more information
		on the functions available.
Software Update	Next Screen	The Software Update function can check for and
		download updated system software for the digital
		tuner. See Using Software Update (Digital tuner) on
		page 152.

150

En

Additional information about the TV system settings

About the input line system

This recorder is compatible with PAL, SECAM, 3.58 NTSC and PAL-60 TV systems. The Input Line System and Input Colour System settings determine how the recorder treats incoming video signals from an external input.

Please note the following points when changing the input line system:

•When the current input is a built-in tuner channel preset, changing the input line system will usually also affect the input line system of the AV2(INPUT 1/ DECODER) input. However if the AV2/L1 In setting is set to Decoder, then the L2 input is affected instead.

•If, when the Input Line System setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel STOP button then pressing INPUT SELECT (also front panel) while the recorder is stopped.

•When you switch the Input Line System setting the Copy List is erased. If you

switch the setting using the STOP button and INPUT SELECT buttons as described above, there is no confirmation, so please use with care.

•You can’t mix recordings of different TV line systems on the same disc.

•When you change this setting, the Input Colour System setting also changes (see below).