Johnson Controls AS instruction manual Disposal of the pump

15.0 Disposal of the pump

For disposing the pump please observe the following instructions:

•Disconnect electrical and hydraulic connections according to technical rules and laws in force.

•Disassemble all components of the pump for separate dismantling; wash the components and clean the structure accurately.

The main components of the pump are made from the following materials:

•	Pump casing, cover,	}
	impeller,		S.S. AISI 316L
	shaft, impeller nut
•	Elastomeres		NBR, EPDM, Viton, Teflon
•	Motor		Aluminium, Cast iron, Copper

Components made from amianthus or lead are not used in our production.

The components of the pump should be properly disposed of, according to the corresponding rules in force in receiver’s country.

28 IM-AS/02.00 GB (0412)