![Operational Check](/images/new-backgrounds/35816/358161x1.webp)
Operational Check
After installing your keypad, check the operation by entering the door number and pressing Open, Close or Stop. Operation should be reliable. However, environmental conditions and the location of the keypad and or receiver will affect distance.
•If the keypad doesn’t activate the operator check the door number. The door number entered must exactly match the door number by the receiver.
•Press the STOP/ON button and wait a seconds before entering your door number. Press the keys slowly.
•If the distance is inadequate check the battery and replace if necessary.
•To maximize the operating distance move the keypad to different locations until a satisfactory distance is achieved. Metal and some types of construction will affect distance.
•If system does not work at any distance, check that the operator is properly operating from the wall station and any other
•Try to erase the receiver and
WARNING
Manufacturer’s Limited Warranty
Allstar warrants its radio controls to be free from defect in material and workmanship for a period of one (1) year from the date of purchase. To obtain service, contact your dealer.
To obtain service under this warranty the buyer must obtain authorization instructions from Allstar for the return of any goods before returning the goods. The goods must be returned with complete identification, with copy of
Goods returned to Allstar for warranty repair within the warranty period, which upon receipt by Allstar are confirmed to be defective and covered by this limited warranty, will be repaired or replaced at Allstar’s sole option, at no cost and returned
This limited warranty does not cover
These warranties are in lieu of all other warranties, either expressed or implied. All implied warranties of merchantability and/or fitness for a particular purpose are hereby disclaimed and excluded. Under no circumstances shall Allstar be liable for consequential, incidental or special damages arising in connection with the use or inability to use this product. In no event shall Allstar’s liability for breach of warranty, breach of contract, negligence or strict liability exceed the cost of the product covered hereby. No person is authorized to assume for Allstar any other liability in connection with the sale of this product.
This warranty gives you specific legal rights. Warranty effective after August 1, 2004.
Copyright © 2004 c.p.Allstar Corporation PART NUMBER 112261 REV B
by
MVP Commercial
Keypad Transmitter
Installation Instructions
Model CKT-240
Proper installation of your radio controls will assure years of
READ THE FOLLOWING INSTRUCTIONS THOROUGHLY
BEFORE STARTING INSTALLATION
The MVP Commercial Keypad Transmitter is designed to remotely operate MVP
WARNING
of the reach of children. or remote controls.
injury or property damage. can be accidentally or
.
Features of the Commercial Keypad Transmitter
ON/STOP: This key turns on the keypad and light system allowing you to operated the system as well as to see the keys in the dark. The keypad will remain active and lights will remain lit for 45 seconds after the last key is pressed.
Low Battery Indicator: The lighting for your keypad also serves as a low battery indicator. When the keypad lights flash on and off the battery should be replaced with a alkaline 9 volt battery.
Allstar MVP
compatible with HomeLink®.
HomeLink® is a registered trade mark of Johnson Controls.