FORM 145.15-IOM7 (412)

CHANGEABILITY OF THIS DOCUMENT

In complying with Johnson Controls policy for continu- ous product improvement, the information contained in this document is subject to change without notice. While Johnson Controls makes no commitment to up- date or provide current information automatically to the manual owner, that information, if applicable, can be obtained by contacting the nearest Johnson Controls service office.

It is the responsibility of operating/service personnel as to the applicability of these documents to the equipment in question. If there is any question in the mind of operating/service personnel as to the applicability of these documents, then, prior to working on the equipment, they should verify with the owner whether the equipment has been modified and if current literature is available.

TABLE OF CONTENTS

Safety Symbols………………………………………………………… 2

Changeability of This Document…………………………………….. 3

General Information……………………………………………………. 4

Installation –

Pre-Installation Inspection of Equipment………………….………4

Rigging……………………………………………………………..... 4

Installation Site……………………………………………………… 4

Unit Mounting……………………………………………………….. 5

Separation of Unit (Evaporator / Condenser)…………………… 5

Water Piping………………………………………………………… 5

Dimensional Data…..…………………………………………………. 6

Ductwork…………..…………………………………………………. 10

Blower Discharge Conversion………………………………………..10

Electrical Wiring……………………...……………………………….. 11

Typical Electrical Schematic……………………………………... 12

Nameplate Electrical Data………………………………………...16

Fan Performance Data………………………………………………..17

Motor and Drive Data………………………………………………19

Blower RPM Adjustment………………………………………….. 20

Water Pressure Drop Data………………….……………………..… 21

Start-Up and Operation………………………………………………. 22

Refrigerant Charges………………………………………………. 22

Pressure Switch Settings…………………………………………. 22

Microprocessor Controller……………………………………....…… 23

Operation……………………………….………………………….. 23

Safety Switches……….……………………………………………23

Safety Controls…………………...........…………………………..24

Microprocessor Flash Codes…………………………………….. 24

Maintenance/Service………………………………………………… 26

Filters………………..……………………………………………… 26

Evaporator Coil…………………………………………….............26

Refrigerant Circuits………………………………………………... 26

Blower.……………………………………………………………… 26

Drive Belts………………………………………………………….. 26

Warranty……………….………………………………………………. 27

R-410A Service Procedures - Quick Reference Guide…………...28

JOHNSON CONTROLS

3

Page 3
Image 3
Johnson Controls CSV060B-240B installation instructions Changeability of this Document

CSV060B-240B specifications

The Johnson Controls CSV060B-240B is a cutting-edge packaged rooftop air conditioning unit designed for commercial applications, renowned for its energy efficiency, reliability, and advanced technological features. This model exemplifies the balance between performance and sustainability, making it a prime choice for businesses seeking effective climate control solutions.

One notable feature of the CSV060B-240B is its variable speed compressor technology. This innovative design allows the unit to adjust its cooling output in response to real-time demand, which significantly enhances energy efficiency. By operating at lower speeds during moderate cooling loads, the system consumes less energy while maintaining consistent indoor comfort. This not only reduces operational costs but also minimizes the environmental impact associated with energy consumption.

In addition to its variable speed compressor, the CSV060B-240B is equipped with advanced intelligent controls. These controls enable users to integrate the unit into building management systems, allowing for seamless monitoring and adjustments. Features such as remote connectivity and smartphone integration provide added convenience, allowing facility managers to optimize system performance from anywhere.

Another key characteristic of the CSV060B-240B is its robust construction designed for durability and easy maintenance. The unit comes with a weatherproof cabinet, which protects internal components from harsh environmental conditions. This design extends the lifespan of the unit and reduces downtime due to maintenance or repairs. Additionally, the access panels are strategically placed to facilitate easy servicing, making it user-friendly for maintenance personnel.

The CSV060B-240B also emphasizes quiet operation, making it ideal for environments where noise levels need to be kept in check, such as hospitals, schools, and offices. Enhanced sound insulation and the use of a quiet fan design contribute to a more pleasant indoor atmosphere.

Overall, the Johnson Controls CSV060B-240B stands out in the market due to its combination of energy efficiency, smart technology, durability, and quiet operation. It is an excellent investment for businesses aiming to enhance their HVAC systems while adhering to sustainability practices and ensuring the comfort of their occupants. The CSV060B-240B not only meets the demands of modern commercial spaces but also sets a new standard for HVAC performance and innovation.