5

HANG DOORS: (A) Insert 2001 Top Pivot located directly above

 

 

the 2007 Bottom Pivot into 2010 Top Pivot Socket. Lock into

place with locking lever. (B) Insert other 2001 Top Pivot into the 2002 Hanger. Lock into place with locking lever. (C) Adjust

2007 Bottom Pivot into the 2011 Floor Bracket's pivot socket until

you feel the 2007 Bottom Pivot touch bottom. DO NOT OVER TIGHTEN.

(D)Lock 2007 Bottom Pivot into place by tightening Hex Lock Nut up against base of bottom pivot.

CUELGUE LA PUERTA: (A) Inserte el Pivote Superior 2001 (localizado directamente encima del Pivote Inferior 2007) en la Base de Pivote Superior 2010. Asegúrelo en su lugar con la palaca de adjuste.

(B)Inserte ontro Pivote Superior 2001 en el Colgador 2002. Adegúrelo en su lugar con la palanca de ajuste. (C) Ajuste el Pivote Inferior 2007 en la base del pivote del Soporte de Piso 2011 hasta que sienta que el Pivote Inferior 2007 toque la parte inferior. NO AJUSTE EN EXCESO.

(D)Ajuste el Pivote Inferior 2007 hasta asegurarlo, ajustando la tuerca haxagonal contra la base del pivote inferior.

ACCROCHEZ LES PORTES: (A) Insérez le Pivot Supérieur 2001 (situé directement au dessus du Pivot Inférieur 2007) dans le socle du Pivot Supérieur 2010. Fixez en place avec le levier de blocage. (B) Insérez ľautre Pivot Supérieur 2001 dans le Crochet 2002. Fixez en place avec le levier de blocage. (C) Ajustez le Pivot Inférieur 2007 dans le socle du Pivot du Crochet de Sol 2011 jusqu'àce que vous sentiez le pivot inférieur 2007 toucher le fond.

NE PAS TROP SERRER. (D) Fixez en place le Pivot Inférieur 2007 en serrant la vis hexagonale contre le base du pivot inférieur.

A

B

C D

6 MOUNT ALIGNERS 1808 on back side of lead doors (4 door sets only).

 

COLOQUE LOS ALINEADORES 1808 en el lado trasero de las puertas

 

de plomo (en los juegos de 4 puertas solamente).

 

FIXEZ LES GUIDES 1808 sur la face arrère des portes de tête (pour les

 

ensembles de 4 portes seulement).

#3 #2

7 CHECK FOR PROPER DOOR OPERATION: Clearance, alignment, adjustments, etc. should be made at this time. If adjustments are

required, they can be made at Track Pivot Socket 2010 and Floor Bracket 2011. Settling, door warpage and other uncontollable conditions may require later readjustments.

Note: Doors must be parallel with track for proper operation.

VERIFIQUE QUE LAS PUERTAS FUNCIONEN CORRECT-AMENTE: fíjese el espacio libre, alineactión, los ajustes etc. deben hacerse ahora. Si se necesitan ajustes, se pueden hacer en el receptáculo giratorio

del riel 2010 y en los soportes de piso 2011. Los reajustes, las combaduras de la puerta y demás condiciones fuera del control podrán requerir otros ajustes más tarde.

Nota: Las puertas deben estar paralelas al riel para que funcionen adecuadamente.

VERIFICATIONS POUR UN BON FONCTIONNEMENT DE LA PORTE: jeu, alignement, etc. Les ajustements doivent être effectués maintenant. Si des ajustements sont nécessaires, ils peuvent être effecués sur le logement 2010 du pivot supérieur et sur les crochets de sol 2011.

Le positionnement, la distorsion de la porte etautres situations peuvent demander des réajustements ultérieurs.

Note: Les portes doivent être paralléles à la glissière pour assurer un bon fonctionnement.

Page 2 Page 4
Page 3
Image 3
Johnson Hardware IN200FLD, 200FD Series manual #3 #2, Hang Doors a Insert 2001 Top Pivot located directly above
Page 2 Page 4

200FD Series, IN200FLD specifications

The Johnson Hardware IN200FLD and IN200FD Series are reputable solutions within the realm of sliding door hardware. Renowned for their innovative design and superior functionality, these series cater to both residential and commercial applications. With a focus on ease of installation, durability, and aesthetic appeal, they have become a preferred choice for architects and builders alike.

One of the standout features of these series is the use of high-quality materials. Crafted from robust stainless steel, the hardware offers excellent resistance to corrosion and wear, ensuring a long lifespan even in high-traffic environments. The precision engineering behind these products allows for smooth and quiet operation, making them ideal for settings where noise reduction is critical.

In terms of technology, the Johnson Hardware IN200FLD and IN200FD Series incorporate advanced roller systems that facilitate seamless door movement. The rollers are designed to reduce friction, which not only enhances usability but also minimizes the risk of damage to the door or track over time. This is particularly advantageous in heavy-use scenarios, where reliability is paramount.

Another important characteristic of these sliding door systems is their versatility. They can accommodate a range of door sizes and weights, providing flexibility in design choices. The IN200FLD series is specifically tailored for folding doors, while the IN200FD is geared towards standard sliding applications. This diversity makes them suitable for various environments, from residential closets to expansive office spaces.

The installation process for these series is straightforward, thanks to comprehensive instructions and pre-cut components that save time and effort. The adjustable features further enhance ease of setup, allowing installers to achieve a perfect fit regardless of the door configuration.

Additionally, both series offer an attractive profile that complements contemporary and traditional settings alike. Available in various finishes, they provide an opportunity to enhance the aesthetic appeal of any space.

In conclusion, the Johnson Hardware IN200FLD and IN200FD Series stand out for their robust construction, advanced technology, versatility, and aesthetic appeal. These features make them well-suited for a wide range of applications, showcasing their value in modern architectural design. Whether used in homes or commercial environments, they embody the quality and elegance that Johnson Hardware is known for, proving to be a reliable choice for sliding door solutions.
Top Page Image Contents